There are many models and types of palm oil processing equipment, but the maintenance and maintenance methods required are generally the same. The following are common maintenance precautions for palm oil processing equipment summarized by BTMA.
First, all oil tanks must be kept clean, and the oil or dust stuck on them should be cleaned in time.
Second, some oil will be added to the oil tank of the palm oil processing equipment in advance to increase the pressure in the oil tank, and the added oil must be clear and free of impurities. It should be filtered before joining, and the oil should be thoroughly cleaned and replaced after a period of time.
Third, the safety valve cannot be disassembled and installed arbitrarily, and the compression degree of its spring cannot be easily adjusted. Once the adjustment is improper, the pressure in the oil tank of the palm oil processing equipment is too high, which will cause the oil circuit to explode.
Fourth, regularly check the use of the wearable parts of palm oil processing equipment, and replace them immediately if there is a little damage.
Fifth, anti-oxidation measures should be taken when palm oil processing equipment is not in use temporarily.