The installation and use of palm oil pressing equipment is also a science. This article will give you an introduction to the installation and use of palm oil pressing equipment. I hope that after reading this introduction, it will be helpful to you in the process of operating palm oil pressing equipment.
1. The foundation must be firm when installing palm oil extraction equipment, and the equipment must be fixed during installation.
2. During installation, there should be an open space on the side of the oil press equipment against the wall, in case the vacuum pump and motor are disassembled.
3. Make sure that the oil press and the oil filter are in a horizontal position.
Precautions for the use of palm oil press:
1. Be regulated when operating the equipment;
2. It is strictly forbidden for foreign matter to enter the squeeze chamber;
3. It is forbidden to start the vacuum pump under the premise that none of the intake valves are opened;
4. When the oil press is not heated enough, the oil is not allowed to be pressed;
3. If the equipment does not work for a long time, it needs to be maintained and maintained;
The above is just a brief introduction to the installation and use precautions of palm equipment, and I hope it can be helpful to everyone.