未分类

Detailed introduction of palm oil pressing processing production equipment

palm oil mill

BTMA is a manufacturer specializing in the production of palm oil machinery. Our company has been in the palm oil production industry for more than 20 years. The palm technology is quite mature. The palm oil processing equipment produced by our company has been sold well at home and abroad. Our company can produce the following equipment: palm oil pressing processing production equipment and various stand-alone machines. More models, more output palm oil equipment, we can also process and customize for you.

Palm oil is pressed from the palm fruit on the oil palm tree. The pulp and kernel produce palm oil and palm kernel oil respectively. The traditional concept of palm oil only includes the former. Palm oil can be refined and fractionated to obtain products with different melting points, which are widely used in the catering industry, food industry and oleochemical industry.

The following will briefly introduce the production process from palm fruit to palm crude oil. Our company can provide all equipment.

1. Palm fruit reception and storage

Workers receive the palm fruit and transport it to the factory for weighing. Then pour into palm fruit slopes for storage. When it needs to be processed, open the discharge door, and the palm fruit will fall to the conveyor and be transported to the sterilization section.

2. Sterilization section

Sterilization uses high temperature to prevent the palm fruit from going rancid. The palm fruit is steamed at 300KPa for 30 minutes, which reduces the enzyme activity and prevents the acid value from rising.

3. Fruit removal section

Palm fruits make up 60% of palm fruit bunches. In this section, we use rotating cylinders to separate palm fruit.

4. Crushing section

This section mainly destroys the palm peel and separates the palm pulp and nuts. Pound the palm pulp to destroy the nuclei and prepare it for the next step of pressing.

5. Pressing section

Screw palm oil press is commonly used pressing equipment. After pressing, oil-water mixture and press cake (fiber cake) can be obtained.

6. Crude palm oil

Use a filter to separate the fibers in the crude oil. The oil and water are then separated by precipitation. After separation, the crude oil is filtered and vacuum dried to obtain crude palm oil.

This article briefly introduces the crude palm oil production line. There are still many details about the palm line. If you have most questions, please contact us.

Benteng Machinery specializes in the production of 1-5t/h palm oil production line for small palm oil mill plant. You are welcome to get in touch with us and tell us your requirement on palm oil mill.

远程发布

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注